Frequently Asked Questions
Straightforward answers to what homeowners commonly ask before a tile project.
Before the Job Starts
Do I need to remove the old tile before you arrive?
Not necessarily. We can handle tile demolition as part of the project scope, and in many cases it's actually better for us to do it — that way we can inspect the substrate underneath and address any issues (cracked concrete, damaged cement board, moisture intrusion) before new tile goes down. If you prefer to handle demo yourself, just let us know ahead of time so we can coordinate the visit schedule accordingly.
What is a substrate, and why does it matter?
The substrate is whatever the tile is being bonded to — concrete slab, cement board, drywall, plywood subfloor, or an existing tile surface. Tile doesn't create its own structural stability; it relies entirely on what's underneath. A substrate that flexes, has voids, or holds moisture will cause tile to crack or grout to fail, sometimes within a year. We check substrate condition before any tile is purchased or ordered so there are no surprises mid-project.
Can tile go directly over my existing floor or wall?
Sometimes, yes — tiling over existing tile is possible if the existing surface is fully bonded, flat, and in good condition. The added height is the main consideration (door clearances, transition strips, plumbing connections). Tiling over vinyl, hardwood, or laminate is generally not recommended without proper prep. Tiling over drywall in a wet area like a shower requires upgrading to a moisture-resistant backer. We'll walk you through the options during our site visit.
During the Install
How long does a typical tile installation take?
It depends heavily on the size of the area, the complexity of the pattern, and whether any substrate work is needed. A straightforward bathroom floor might be one day for setting and another for grouting. A full bathroom with shower walls, tub surround, and floor — including waterproofing and any demo — can run four to six days. We'll give you a realistic timeline after seeing the space, not before.
Will the bathroom or kitchen be usable during the project?
During active demo and setting phases, the space is generally out of service. Once tile is set, there's a cure period (usually 24 hours minimum before grouting, and another 24 to 72 hours before the space should be used with water). For bathroom projects, we try to sequence the work so the disruption window is as short as possible — but we won't rush the cure time, because that's where shortcuts show up later as problems.
What kind of waterproofing do you use in showers?
For shower pans and wet-area walls, we use a liquid-applied waterproofing membrane — products like Schluter KERDI, RedGard, or similar systems depending on the substrate and project requirements. These get applied to the substrate before any tile is set, with extra attention to corners, seams, and penetrations (like drain flanges). Grout and tile are not waterproof on their own; the membrane behind them is what keeps the structure dry over time.
Materials and Finish
What grout color should I choose?
Grout color has a bigger visual impact than most people expect. A contrasting grout (like dark grout with white tile) emphasizes the tile pattern and each individual tile. A matching or blending grout makes the surface read as a continuous plane. Neither is wrong — it's a design preference. One practical note: lighter grouts show staining more in high-traffic areas, though sealing grout after installation helps significantly with maintenance. We're happy to show you samples before the job starts.
What's the difference between porcelain and ceramic tile?
Both are kiln-fired clay products, but porcelain is fired at higher temperatures and made from denser clay — it absorbs less water and is generally harder and more durable. Ceramic is easier to cut, lighter, and often more affordable. For floors with foot traffic or any wet area, porcelain is the more practical choice. Ceramic works well for wall applications and dry backsplashes. The installation process is similar, though large-format porcelain requires different trowel notch sizes and more careful substrate prep due to the weight and rigidity of the tile.
Do you handle the tile purchase, or do I supply it?
Either works. Some customers prefer to choose and purchase their own tile — we just ask that you order enough material (typically 10-15% overage for cuts and breakage, more for diagonal or herringbone patterns). If you'd like guidance on material selection, we can point you toward local suppliers in the Sacramento area and discuss what works for your specific application. Just let us know your preference when we talk through the project.